Teledyne 201A Pet Fence user manual

MANUAL ADDENDUM

MODEL 201A

AMMONIA ANALYZER

TELEDYNE ADVANCED POLLUTION INSTRUMENTATION

9480 CARROLL PARK DRIVE

SAN DIEGO, CA 92121-5201

TOLL-FREE:

Copyright 2005 T-API Inc.

800-324-5190

858-657-9816

858-657-9800

12 September, 2005

Teledyne API Model 201A NH3 Analyzer Instruction Manual, 04689, Rev. B1

SAFETY MESSAGES

Your safety and the safety of others is very important. We have provided many important safety messages in this manual. Please read these messages carefully.

A safety message alerts you to potential hazards that could hurt you or others. Each safety message is associated with a safety alert symbol. These symbols are found in the manual and inside the instrument. The definition of these symbols is described below:

GENERAL WARNING/CAUTION: Refer to the instructions for details on the specific danger.

CAUTION: Hot Surface Warning

CAUTION: Electrical Shock Hazard

Technician Symbol: All operations marked with this symbol are to be performed by qualified maintenance personnel only.

Electrical Ground: This symbol inside the instrument marks the central

safety grounding point for the instrument.

The analyzer should only be used for the purpose and in the manner described in this manual.

If you use the analyzer in a manner other than that for which it was intended, unpredictable behavior could ensue with possible hazardous consequences.

Teledyne API Model 201A NH3 Analyzer Instruction Manual, 04689, Rev. B1

TABLE OF CONTENTS

SAFETY MESSAGES ...

TABLE OF CONTENTS...

A AMMONIA ANALYZER...

PRINCIPLE OF OPERATION ...

Special Considerations for Ammonia Measurement...

Sample Filtration...

A ANALYZER SPECIFICATIONS ...

CALIBRATION PROCEDURE...

ZERO/SPAN CALIBRATION BASIC INSTRUMENT...

Zero/Span Calibration with Z/S Valves or ECO Option...

TN/TNx Channel Calibration Quality...

Calibration ...

Channel Calibration Quality ...

MAINTENANCE SCHEDULE ...

A MAINTENANCE SCHEDULE ...

MAINTAINING THE MNH CONVERTER ...

AUTOZERO FLOW CHECK ...

A SPARE PARTS LIST...

Teledyne API Model 201A NH3 Analyzer Instruction Manual, 04689, Rev. B1

LIST OF FIGURES

FIGUREA AMMONIA ANALYZER BLOCK DIAGRAM ...

FIGURE 2 - M201A EXTERNAL PNEUMATIC CONNECTION DIAGRAM WITH ECO (EXTERNAL CALIBRATOR

OPTION) ...

FIGUREA PNEUMATIC DIAGRAM BASIC ...

FIGUREA PNEUMATIC DIAGRAM Z/S OPTION ...

FIGUREA PNEUMATIC DIAGRAM EXTERNAL CALIBRATOR OPTION (ECO) ...

FIGURE MNH CONVERTER CARTRIDGE ...

Teledyne API Model 201A NH3 Analyzer Instruction Manual, 04689, Rev. B1

LIST OF TABLES

TABLE- ZERO CALIBRATION PROCEDURE - ZERO GAS THROUGH THE SAMPLE PORT ...

TABLE- ENTER THE EXPECTED SPAN GAS CONCENTRATIONS PROCEDURE ...

TABLE 2.3 - SPAN CALIBRATION PROCEDURE - SPAN GAS THRU SA