SIIG 04-0837A Computer Drive user manual

USB 2.0 Smart Card Reader

Quick Installation Guide


The USB 2.0 Smart Card Reader is portable, and is widely used with USB equipped PC or Mac desktops or notebooks.

Key Features and Benefits

Compliant with all major smart cards and industry standards

Power and activity LED indicator

USB bus-powered and plug-n-play

Package Contents

USB 2.0 Smart Card Reader

Driver CD & Quick installation guide

System Requirements

PC or Mac desktop or notebook with an available USB port

Windows 2000 SP4 or later

Mac OS X v10.6 or later

Power and Activity LED indicators

Smart card

USB connector

Figure 1: Layout

Power LED: steady blue light means power on

Activity LED: pink light means smart card is detected

Driver Installation

For 2000 and XP, follow the steps below to install the driver. For other Windows and Mac OSes, the driver is embedded, just plug the reader into a

USB port and the driver will load automatically.

Plug the card reader to an available USB port. Click Cancel at the Found New

Hardware (if prompted).

Insert the driver CD. Double click RSKIT_

100618_AllinOne in the driver CD.

Wait while the driver installs, then click

Finish to complete the installation.

Technical Support and Warranty

QUESTIONS? SIIGs Online Support has answers! Simply visit our web site at new drivers and solutions. Answers to your questions could be just a few clicks away.

You can also submit questions online and a technical support analyst will promptly

SIIG offers a 2-year manufacturer warranty with this product. This warranty covers the original purchaser and guarantees the product to be free of any defects in materials or workmanship for two (2) years from the date of purchase of the product.

SIIG will, at our discretion, repair or replace (with an identical product or product having similar features and functionality) the product if defective in materials or workmanship. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Please see our web site for more warranty details.

If you encounter any problems with this product, please follow the procedures below.

A) If it is within the store's return policy period, please return the product to the store where you purchased from.

B) If your purchase has passed the store's return policy period, please follow the steps below to have the product repaired or replaced.

Step 1: Submit your RMA request. to submit a request to SIIG RMA or fax a request to 510-657-5962. Your RMA request will be processed, if the product is determined to be defective, an RMA number will be issued.

Step 2: After obtaining an RMA number, ship the product.

Properly pack the product for shipping. All accessories that came with the original package must be included.

Clearly write your RMA number on the top of the returned package. SIIG will refuse to accept any shipping package, and will not be responsible for a product returned without an RMA number posted on the outside of the shipping

You are responsible for the cost of shipping to SIIG. Ship the product to the following address:

SIIG, Inc.

6078 Stewart Avenue

Fremont, CA 94538-3152, USA

About SIIG, Inc.

Founded in 1985, SIIG, Inc. is a leading manufacturer of IT connectivity solutions (including Serial ATA and Ultra ATA Controllers, FireWire, USB, and legacy I/O adapters) that bridge the connection between Desktop/

Notebook systems and external peripherals. SIIG continues to grow by adding

A/V and Digital Signage connectivity solutions to our extensive portfolio.

SIIG products offer comprehensive user manuals, many user-friendly features, and are backed by an extensive manufacturer warranty. High quality control standards are evident by the overall ease of installation and compatibility of our products, as well as one of the lowest defective return rates in the industry.

SIIG products can be found in computer retail stores, mail order catalogs, through major distributors, system integrators, and VARs in the Americas and the UK, and through e-commerce sites.


USB 2.0 Smart Card Reader




This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.