Philips Inca 311 Security Camera user manual

Industrial Vision

Intelligent Camera

12NC: 8122 410 5680.0

Philips Applied Technologies

Inca 311 Hardware Manual

Version 1.3

A publication of:

Philips Applied Technologies

Industrial Vision

Eindhoven, The Netherlands

All rights are reserved.

Reproduction in whole or in part is prohibited without the written consent of the copyright owner.

The information in this publication is furnished for guidance, and with no guarantee as to its accuracy or completeness.

Philips Applied Technologies does not assume liability for any consequences to its use; specifications and availability of goods mentioned in it are subject to change without notice

Printed in the Netherlands, 2005-12-12

8122 410 5688.4

IncaHardware Manual ...

INTRODUCTION ...

ABOUT THIS MANUAL...

SUPPLIED PARTS...

ABOUT THE INSTALLATION ...

HARDWARE ...

TRIMEDIA PROCESSOR ...

CMOS SENSOR ...

CAMERA CONNECTIONS ...

POWERING UP ...

SOFTWARE INSTALLATION...

MECHANICAL INTERFACE...

TROUBLE SHOOTING ...

KNOWN PROBLEMS USING THE INCA...

SERVICE AND SUPPORT...

TECHNICAL SPECIFICATION ...

INTRODUCTION

Congratulations on buying the Inca vision system!

An Inca is a high quality intelligent camera for image acquisition and processing. Inca offers a complete vision system that is ACCURATE, FAST, COMPACT and COSTEFFECTIVE. The high-resolution, high dynamic range sensor provides the best basis for the development of a very accurate vision system. Having all the processing power close to the sensor and the capability of region of interest processing reduces processing time and thus faster systems can be realised. Because of this integrated processor, display capabilities and industrial I/O, the Inca offers a very compact total vision solution, without any

Inca solution besides very cost-effective also transparent and easy to work with. Finally the industrial housing provides optimal possibilities for incorporating the Inca in almost every (industrial) environment.

SUPPLIED PARTS

The supplied equipment comprises the following:

One Inca 311 camera.

One hardware manual (this document).

If any of these items is not included notify your supplier immediately.

ABOUT THE INSTALLATION

The installation consists only of making the right connections to the Inca. Start-up and running an application is completely done under software control.

Software is not provided with the Inca, but is a separate product that can be purchased from Industrial Vision. Refer to chapter 3 for available software.

ABOUT THIS MANUAL

This manual explains how to install your Inca camera and how to check that it is working correctly.

2005-12-12

The Inca hardware consists of the following modules:

TriMedia processor

CMOS sensor

IEEE 1394 (FireWire) interface

RS232 serial interface

Video outputs VGA and CVBS

Digital inputs and outputs

Trigger input and flashlight output

Reset input