Omron CS1W-CLK21-V1 Network Card User Manual

Cat. No. W309-E1-09

CS1W-CLK21-V1

CJ1W-CLK21-V1

C200HW-CLK21

CVM1-CLK21

CQM1H-CLK21

(CS1W-RPT01/02/03 Repeater Units)

Controller Link Units

OPERATION MANUAL

CS1W-CLK21-V1

CJ1W-CLK21-V1

C200HW-CLK21

CVM1-CLK21

CQM1H-CLK21

(CS1W-RPT01/02/03 Repeater Units)

Controller Link Units

Operation Manual

Revised January 2006

OMRON products are manufactured for use according to proper procedures by a qualified operator and only for the purposes described in this manual.

The following conventions are used to indicate and classify precautions in this manual. Always heed the information provided with them. Failure to heed precautions can result in injury to people or damage to property.

Indicates an imminently hazardous situation which, if not avoided, will result in death or

serious injury. Additionally, there may be severe property damage.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. Additionally, there may be severe property damage.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury, or property damage.

OMRON Product References

All OMRON products are capitalized in this manual. The word Unit is also capitalized when it refers to an OMRON product, regardless of whether or not it appears in the proper name of the product.

The abbreviation Ch, which appears in some displays and on some OMRON products, often means

word and is abbreviated Wd in documentation in this sense.

The abbreviation PLC means Programmable Controller. PC is used, however, in some Programming Device displays to mean Programmable Controller.

Visual Aids

The following headings appear in the left column of the manual to help you locate different types of information.

Note Indicates information of particular interest for efficient and convenient operation of the product.

1. Indicates lists of one sort or another, such as procedures, checklists, etc.

OMRON, 1997

All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form, or by any means, mechanical, electronic, photocopying, recording, or otherwise, without the prior written permission of

No patent liability is assumed with respect to the use of the information contained herein. Moreover, because OMRON is constantly striving to improve its high-quality products, the information contained in this manual is subject to change without notice. Every precaution has been taken in the preparation of this manual. Nevertheless, OMRON assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained in this publication.

Unit Versions of CS/CJ-series Controller Link Units

Unit Versions

A unit version has been introduced to manage CS/CJ-series Controller Link Units according to differences in functionality accompanying upgrades.

Unit Version Notation on Products

The unit version code is provided on the nameplate of the CS/CJ-series Controller Link Units for which unit versions are being managed. This system applies to Controller Link Units with unit version 1.2 or

Example: CS1W-CLK21-V1

CS-series Controller Link Unit

CS1W-CLK21-V1

CONTROLLER LINK UNIT

Unit version 1.2

Lot No. 040901 0000

OMRON Corporation

MADE IN JAPAN

Confirming Unit Versions with Support Software

CX-Programmer version 5.0 or higher can be used to confirm the unit version in the Unit Manufacturing

Information.

1. 1. In the I/O Table Window, right-click on the Controller Link Unit, and then select Unit Manufacturing Information.

2. The following Unit Manufacturing Information Dialog Box will be displayed.

Indicates the unit version.

Example: In this Unit Manufacturing Information Dialog Box, unit version

1.2 is displayed. Use this dialog box to confirm the unit version of the Controller Link Unit that is connected online.

Using the Unit Version Labels

Unit version labels are provided with the product. These labels can be attached to the front of previous

Controller Link Units to differentiate between Controller Link Units of different unit versions.

Unit Version Notation

The unit versions are indicated in this manual as follows:

Notation in product nameplate

Notation in this manual

Ver.1.2 or later after the lot number CS/CJ-series Controller Link Units Information for which no particular with unit version 1.2 or later version is specified applies to all

Blank after the lot number

Pre-Ver. 1.2 CS/CJ-series Control- unit versions. ler Link Units

Function Support by Unit Version

Earlier version (Pre-Ver. 1.2)

Unit version 1.2

CS1W-CLK21-V1

CJ1W-CLK21-V1

12,000 max.

CS1W-CLK21-V1

CJ1W-CLK21-V1

20,000 max.

Data Link Area

The same are