New Holland BB9O8O Lawn Mower user manual

System that is monitored by IntelliView III monitoring systems, constantly measures the load on the plunger sensors.

Any change in that load or any change of the density requirement results in an automatic adjustment of the hydraulic pressure on the side doors and top chamber rail. Each and every bale will be exactly made the way you want it!

SQUARE CORNERS, EQUALLY FILLED

As the stuffer fork moves the pre-compressed crop into the bale chamber, its speed is increasing.

This fine tuning of the bale formation process, introduced on the new BB9000 models, further assures a perfect filling of the top corners of the bale, whether it be working in straw, hay or silage.

BALING EXCELLENCE

THE RIGHT KNOT, 4 OR 6 PER BALE

Higher bale density, lower strain on the knotters and increased knotting reliability are the known result of the proven double knotter system. Two twines are fed to the knotter who makes a final knot for the bale that is complete and a starting knot for the bale that is still in production.

Four knotters on the 80 cm wide models and six knotters on the 120 cm wide models maintain the bale integrity even when producing high density bales.

FULLY INFORMED: BALE MOISTURE CONTENT

Accurate information about the condition of the crop being baled prevents processing a crop which is not really ready.

The displayed information provided by the moisture sensing system available as a dealer installed accessory, also allows precise application of additives. Because the two star wheels are penetrating the bale, they provide an extremely accurate measurement of the moisture content.

RELIABLE KNOTTER EFFICIENCY

Knotter fans are fitted as standard: clean knotters add to the knotter performance. The new round shielding on the knotter compartment furthermore amplifies the air-flow for improved fan efficiency.

SUPERIOR CHOPPING

IN RESPONSE TO VARYING

CHOP LENGTH REQUIREMENTS

Varying crop-growing conditions, evolving crop conservation methods and specific fodder requirements call for different chop lengths.

The new range of BB9000 big balers provide the flexibility that is requested by the customers.

Crop Cutter options / Knife Distance (mm)

6 knives (packer cutter)

11 knives (Medium cut)

17 knives (Medium cut)

23 knives (Short Cut)

33 knives (Short Cut)

REDUCED POWER CONSUMPTION WITH THE

CROPCUTTER SYSTEM

The proven design of the CropCutter system with the W-tine pattern rotor assures an even spread of the cutting force and a smooth cutting action. The ingenious design not only divides the power requirement equally over the two rotor halves for both the 80 cm and the 120 cm bale widths but it assures an equal distribution of the crop over the f