Ultra Slim Portable DVD Writer with M-DISC™ Support user manual


Please do not connect the USB cables by any means other than specified above.

Using the wrong type of cable with this drive can cause it to malfunction.

Location and Function of Controls

The appliance is not intended for use by young children or infirm persons without supervision. Young Children should be supervised to ensure that they do not play with appliance.

This following is the general figure of the design of the drive.

The drives appearance and specifications may change without prior notice.

If the appliance is supplied from a cord extension set or an electrical portable outlet device, the cord extension set on electrical portable outlet device must be positioned so that it is not subject to splashing or ingress of moisture.

(Front View)

1 Disc tray

2 Drive activity indicator(LED)

3 Eject Button

4 Emergency Eject Hole

Shut down the power supply when this eject will be used.

The drive supports both Windows and Mac . To use it properly, please follow directions below.

How to Eject Disc from the drive

When using with Mac

- Click the eject button located on Mac OS menu or toolbar.

When using with Windows

- Press the eject button in the front of the product.

* Software CD (for Windows only)

- The Software CD includes DVD software for usage for Windows.

(Rear View)

Slim Portable DVD Writer

1 USB Connector (mini)

This connector is used to connect to the USB cable.

What is TV Connectivity?

TV Connectivity is a function that allows you to enjoy videos, pictures and music

PHOTO FRAME, PC) that supports USB connectivity.

Quick Set-up Guide

To install of your product, please read this guide manual carefully and completely.


Hardware Installation

Please pay attention to handling Electrostatic Sensitive Devices, you may use anti-static products such as wrist straps, heel straps, mats to protect your body from electrostatic.

Make sure you have a personal computer with any open USB ports before connecting the drive to your computer.

How to Use TV Connectivity

Connecting to computer or A/V Device.

* This product is defaulted to ODD mode when it is powered on.

1. With the tray open, press and hold the Ejectbutton for 2 seconds.

(The LED indicator will turn on, switching to TV mode.

Press and hold the button again for 2 seconds with the tray open to return to ODD mode).

2. Insert your supported media into the drive.

The disc file system will be converted to FAT32 and will be recognized as USB flash memory.

3. Select and play the files from your A/V device to enjoy videos, pictures and music.

Refer to your A/V device owners manual for more information.

Connect the drive to the computer as shown in figure.

1 Connect the USB cable (mini plug) to the drive.

2 Connect the other end of the USB cable to your computer.

The drive may get its power from the PC USB power. All systems may not meet USB power requirements and full performance may not be achieved.

In this case, connect to the USB Y type cable (not supplied.).

When the computer is ready, confirm that the drive is detected. And then, insert the supplied software CD into the drive and install the software.

Normal operation is not guaranteed if you use a USB hub or unspecified USB extension cables.

Due to compatibility issue of some AV devices and disc, may not work.

'Surface Pro 3, 4' Compatibility The drive can work with 'Surface Pro 3, 4' via single USB connection.

Safety Instructions

Recommended discs

Universal Serial Bus (USB) 2.0 interface for high-speed data transfer.

Buffer Under Run error protection technology.

Emergency eject support.

Combination of CD-R/RW, DVD-R/RW, DVD+R/RW, DVD+R DL, DVD-R DL, M-Disc (DVD+R SL) and DVD-RAM drive functions into one drive.

Supports region playback control Phase II.

PC USB powered, no AC adapter needed.

Supports TV Connectivity.

Recommended media manufacturer

System Environment

* Compatibility problem in write/read function may occur with some media depending on the media manufacturing quality.

* To achieve maximum Record & Write speed your system may require data to be copied first to the computers hard drive rather than directly from another source disc or drive.

CAUTION : The laser used in the Writer can damage your eyes.

Do not attempt to open the cover. To reduce the risk of electric shock, do not remove the cover (or back).

There are no user-serviceable parts inside. Refer servicing to qualified service personnel. Use of controls or performance of procedures other than those specified herein may result in hazardous radiation exposure.

WARNING : To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.