Pasta Sheet Roller user manual

Bring the taste of fresh pasta into your home with this Pasta Roller and Cutter Set, that attaches directly to your KitchenAid Stand Mixer. The Pasta Roller helps you guide sheets of fresh homemade dough through and get the desired thickness. You can then cut the pasta sheets into thick pappardelle noodles or squares for ravioli or run the sheets through the fettuccine or spaghetticutter for perfectly uniform pasta.
Up to 140 mm

See Roller settings chart

Thick Noodles

Egg Noodles

Fettuccine

Thin Fettuccine

Linguine Fini

Very Thin Angel

Hair-Type Pasta

Very Fine Linguine

PASTA ROLLER

LASAGNETTE

FETTUCCINE CUTTER

SPAGHETTI CUTTER

CAPELLINI CUTTER

FOR DETAILED INFORMATION ON USING THE PASTA ROLLER AND CUTTERS: and tips on how to use your Pasta Roller and Cutters.

4 | USING THE PASTA ROLLER AND CUTTERS

11/11/15 1:03 PM

USING THE PASTA ROLLER AND CUTTERS

ROLLER SETTINGS CHART

ATTACHMENT

SUGGESTED USES

PASTA ROLLER

Kneading and thinning dough

Thick kluski-type noodles

Egg noodles

Lasagna noodles, fettuccine, spaghetti, and ravioli

Tortellini, thin fettuccine, and linguini fini

Very thin angel-hair-type pasta/capellini or very fine linguine

ATTACHING THE PASTA ROLLER AND CUTTERS

Before first use

Before using your attachments, remove the Do not immerse in water label.

To avoid damage, do not wash or immerse attachments in water or other liquid. Do not wash in dishwasher.

NOTE: These attachments are designed to be used with pasta dough only. To avoid damaging your Pasta Roller and

Cutters, do not cut or roll anything other than pasta.

Turn Stand Mixer off and unplug.

For Stand Mixers with a hinged attachment hub cover: Flip up to open.

or Stand Mixers with a removable attachment hub cover: Turn the attachment knob counterclockwise to remove attachment hub cover.

USING THE PASTA ROLLER AND CUTTERS | 5

11/11/15 1:03 PM

USING THE PASTA ROLLER AND CUTTERS

Insert attachment shaft housing into the attachment hub, making certain the power shaft fits into the square hub socket. If necessary, rotate the

Pasta Roller or Cutter back and forth.

The pin on the attachment housing fits into the notch of the hub rim when in the proper position.

Tighten the Stand Mixer attachment hub knob until the attachment is completely secured to the Stand Mixer.

MAKING PASTA

IMPORTANT: When using the Pasta Roller and Cutters, do not wear ties, scarves, loose clothing or long necklaces; gather long hair with a clasp.

Prepare pasta dough (see Recipe section). Cut dough into sections that fit in the Pasta Roller.

Pull the roller adjustment knob straight out and turn to setting 1.

Release the knob, making certain the pin on the roller housing engages the opening on the back of the adjustment knob, allowing the knob to fit flush against the roller housing.

6 | USING THE PASTA ROLLER AND CUTTERS

11/11/15 1:03 PM

Turn Stand Mixer to speed 2. Feed flattened dough into rollers to knead. Fold dough in half