Hotpoint KSOS 89 PX S Oven Accessories User Manual

POSITION 4

POSITION 5

GUIDES for the sliding racks

DRIPPING PAN

Control panel

Control panel

SELECTOR knob

THERMOSTAT knob

TIME SETTING button

TIMER knob

FAST CLEAN button

7. Preheating indicator

8. TEMPERATURE and TIME digits

9. CLOCK Icon

10. END OF COOKING Icon

11. DURATION Icon

12. TIMER Icon

13. DOOR LOCK Indicator

14. STOP Icon

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

Installation

! Please keep this instruction booklet in a safe place for future reference. If the appliance is sold, given away or moved, please make sure the booklet is also passed on to the new owners so that they may benefit from the advice contained within it.

! Please read this instruction manual carefully: it contains important information concerning the safe operation, installation and maintenance of the appliance.

Ventilation

To ensure adequate ventilation, the back panel of the cabinet must be removed. It is advisable to install the oven so that it rests on two strips of wood, or on a completely flat surface with an opening of at least 45 x 560 mm (see diagrams).

Positioning

! Do not let children play with the packaging material; it should be disposed of in accordance with local separated waste collection standards (see Precautions and tips).

! The appliance must be installed by a qualified professional in accordance with the instructions provided. Incorrect installation may damage property or cause harm to people or animals.

Built-in appliances

Use an appropriate cabinet to ensure that the appliance operates properly:

Centring and fixing

Position the 4 tabs on the side of the oven so that they are lined up with the 4 holes on the outer frame. Adjust the tabs according to the thickness of the cabinet side panel, as shown below:

20 mm thick: take off the removable part of the tab (see diagram).;

The panels adjacent to the oven must be made of heatresistant material.

Cabinets with a veneer exterior must be assembled with glues which can withstand temperatures of up to 100C.

To install the oven under the counter (see diagram) or in a kitchen unit, the cabinet must have the following dimensions:

16 mm thick: use the second groove (see diagram).

575-585 mm.

18 mm thick: use the first groove, which has already been set in the factory (see diagram).

Secure the appliance to the cabinet by opening the oven door and putting 4 screws into the 4 holes on the outer

! All parts which ensure the safe operation of the appliance must not be removable without the aid of a tool.

! The appliance must not come into contact with electrical parts once