GE® Household Water Filtration System GNWH38S user manual

Installation kit.
Do not install filter in an outside location or anywhere it will be exposed to sunlight.

GNWH38F is Tested and Certified by NSF International against NSF/ANSI Standard 42 for materials and structural integrity requirements only.


? Filter system (head and canister)

? Product literature

? Canister wrench

? Timer and batteries

GNWH38F is tested and certified by NSF International against NSF/ANSI Standard 42 with cartridge FXHTC for the reduction of Chlorine: Taste and Odor.

184D1064P001 (04--04 JR) 49-50125

GENERAL ELECTRIC COMPANY, Appliance Park, Louisville, KY 40225


FXHTC Cartridge

Performance Data

This system has been tested according to NSF/ANSI 42 for the reduction of the substances listed below. The concentration of the indicated substances in water entering the system was reduced to a concentration less than or equal to the permissible limit for water leaving the system, as specified in NSF/ANSI 42.

Influent Challenge Reduction


Requirements Reduction

Standard 42

Chlorine: Taste and Odor

2.0 mg/L 10%

Test Conditions

Operating Requirements

Flow Rate: 3 gpm (11.4 Lpm)

Pressure: 30125 psi (2.16.9 bar) pH: 7.51

Turbidity: 5 NTU Max.

Inlet Pressure: 60 PSI (4.1 bar)

Temperature: 40F100F (4.4C37.7C)

Temperature: 68F 5F (19.8C 2.5C)

Capacity: 5,000 gallons (18,927L) or 3 months

Testing was performed under standard laboratory conditions, actual performance may vary.

Additional Replacement Filter

FXHSC Cartridge

FXHSC Filter could be used as a replacement filter.


30 Micron*

24,000 gallons

*Based on manufacturers internal testing.

Operating Guidelines

MinimumMaximum Supply Water Pressure: 20125 psi

MinimumMaximum Supply Water Temperatures: 40F100F

Filter Cartridge Replacement

You should change your filter when the water flow is noticeably reduced or at least every 3 months.