GE® Built In Air Conditioner AKEQ14DCH user manual

Remote Control Included.
Urn the unit OFF and unplug your air conditioner before cleaning.

or your safetydo not store or use combustible materials, gasoline or other flammable vapors or liquids in the vicinity of this or any other appliance.

? If the receptacle does not match the plug, the receptacle must be changed out by a qualified electrician.

SAFETY INFORMATION

IMPORTANT SAFETY INFORMATION

WARNING USE OF EXTENSION CORDS

RISK OF FIRE. Could cause serious injury or death.

O NOT use an extension cord with this air conditioner.

O NOT use surge protectors or multi-outlet adaptors with this air conditioner.

HOW TO CONNECT ELECTRICITY

Do not, under any circumstances, cut or remove the third

(ground) prong from the power cord. For personal safety, this appliance must be properly grounded.

DO NOT use an adapter plug with this appliance.

The power cord of this appliance is equipped with a

3-prong (grounding) plug which mates with a standard

3-prong (grounding) wall outlet to minimize the possibility of electric shock hazard from this appliance.

Power cord includes a current interrupter device. A test and reset button is provided on the plug case. The device should be tested on a periodic basis by first pressing the

TEST button and then the RESET button while plugged into the outlet. If the TEST button does not trip or if the

RESET button will not stay engaged, discontinue use of the air conditioner and contact a qualified service technician.

Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded.

Where a 2-prong wall outlet is encountered, it is your

personal responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet.

The air conditioner should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating plate.

This provides the best performance and also prevents overloading house wiring circuits which could cause a fire hazard from overheated wires.

See the Installation Instructions, Electrical

Requirements section for specific electrical conn