GE® Dehumidifier ADER40LN user manual

Easy roll casters.
Must be replaced with a new power supply cord obtained from the manufacturer and not repaired. Do not use a cord that shows cracks or abrasion damage along its length or at either the plug or connector end.

Troubleshooting Tips

? If the receptacle does not match the plug, the receptacle must be changed out by a qualified electrician

E does not support any servicing of the dehumidifier. We strongly recommend that you do not attempt to service the dehumidifier yourself.

? For your safety, do not store or use combustible materials, gasoline or other flammable vapors or liquids in the vicinity of this or any other appliance.

ll dehumidifiers contain refrigerants, which under federal law must be removed prior to product disposal. If you are getting rid of an old product with refrigerants, check with the company handling disposal about what to

? Do not use outdoors.

? T his dehumidifier is intended for indoor residential applications only.

This dehumidifier should not be used for commercial or industrial applications.

? T hese R410A Dehumidifier Systems require contractors and technicians to use tools, equipment and safety standards approved for use with this refrigerant. DO NOT use equipment certified for R22 refrigerant only.

? T urn the dehumidifier OFF and unplug it before cleaning.

HOW TO CONNECT ELECTRICITY

Do not, under any circumstances, cut or remove the third (ground) prong from the power cord.

For personal safety, this appliance must be properly

Where a 2-prong wall outlet is encountered, it is your personal responsibility and obligation to have it replaced with a properly grounded

3-prong wall outlet.

DO NOT use an adapter plug with this appliance.

The dehumidifier should always be plugged into its own individual electrical outlet, which has a voltage rating matching the rating plate.

Consumer Support

The power cord of this appliance is equipped with a 3-prong (grounding) plug which mates with a standard 3-prong (grounding) wall outlet to minimize the possibility of electric shock hazard from this appliance.

Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded.

This provides the best performance and also