For a Spanish version of this manual, visit our Website at
Para consultar una version en espaol de este manual de instrucciones, visite nuestro sitio de internet
Printed in the United States
Safety Information ... ... ... . .
Warranty ... ... ... ... ... ... .
Assistance / Accessories ... . . .
PHB920 - 30" Free-Standing Range
PHS920 - 30" Slide-In range
Using The Range
Surface Units ... ... ... ... ... . . .
Cookware for Induction Cooktop . . . .11
Oven Controls ... ... ... ... ... . .
Special Features ... ... ... ... . . .
Oven Racks ... ... ... ... ... ...
Aluminum Foil and Oven Liners ... .
Cookware ... ... ... ... ... ... . .
Cooking Modes ... ... ... ... ...
Cooking Guide ... ... ... ... ... .
Warming Drawer... ... ... ... . . .
Care and Cleaning
Cleaning the Range Exterior ... . .
Cleaning the Range Interior ... . . .
Cleaning the Glass Cooktop... ... .
Probe ... ... ... ... ... ... ... . .
Maintenance ... ... ... ... ... . . .
Troubleshooting Tips ... ... . .
Write the model and serial numbers here:
Model # ...
Serial # ...
You can find them on a label behind the door or drawer.
49-80695-2 10-14 GE
IMPORTANT SAFETY INFORMATION.
READ ALL INSTRUCTIONS BEFORE USING.
Read all safety instructions before using the product. Failure to follow these instructions may result in fire, electrical shock, serious injury or death.
A child or adult can tip the range and be killed.
Verify the anti-tip bracket has been properly installed and engaged.
Ensure the anti-tip bracket is re-engaged when the range
Do not operate the range without the anti-tip bracket in place and engaged.
Failure to follow these instructions can result in death or serious burns to children or adults.
To reduce the risk of tipping the range, the range must be secured by a properly installed anti-tip bracket. See installation instructions shipped with the bracket for complete details before attempting to install.
For Free-Standing and Slide-In Ranges
To check if the bracket is installed and engaged properly, look underneath the range to see that the rear leveling leg is engaged in the bracket. On some models, the storage drawer or kick panel can be removed for easy inspection.
If visual inspection is not possible, slide the range forward, confirm the anti-tip bracket is securely attached to the floor or wall, and slide the range back so the rear leveling leg is under the anti-tip bracket.
If the range is pulled from the wall for any reason, always repeat this procedure to verify the range is properly secured by the anti-tip bracket.
Free-Standing and Slide-In Ranges
Never completely remove the leveling legs or the range will not be secured to the anti-tip device properly.
STATE OF CALIFORNIA PROPOSITION 65 WARNING
The California Safe Drinking Water and Toxic Enforcement Act requires the Governor of California to publish a list of substances known to the state to cause cancer, birth defects or other reproductive harm, and requires businesses to warn customers of potential exposure to such substances.
This product contains one or more chemical known to the State of California to cause cancer, birth defects or other reproductive harm.
Self-clean ovens can cause low-level exposure to some of these substances, including carbon monoxide, during the cleaning cycle. Exposure can be minimized by venting with an open window or using a ventilation fan or hood.
SAVE THESE INSTRUCTIONS
This unit has been tested and found to comply with the limits for a class B digital device, pursuant to Part 18 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This unit generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this unit does cause harmful interference to radio or television reception, which can be determined by turning the unit off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
? Reorient or relocate the receiving antennae.
? Increase the distance between the unit and receiver.
? Connect the unit into an outlet or a circuit different from that t