? Remove the colored protective tape from the control panel.
All dryers MUST be exhausted to the outside to prevent large amounts of moisture and lint from being blown into the room.
Use only rigid metal 4? diameter ductwork inside the dryer cabinet and use only rigid metal 4? diameter or UL approved transition ducting between the dryer and the home duct. USE OF
PLASTIC OR OTHER COMBUSTIBLE DUCTWORK
CAN CAUSE A FIRE. PUNCTURED DUCTWORK
CAN CAUSE A FIRE IF IT COLLAPSES OR
BECOMES OTHERWISE RESTRICTED IN USE OR
For complete details, follow the Installation
IMPORTANT SAFETY INFORMATION.
READ ALL INSTRUCTIONS BEFORE USING.
YOUR LAUNDRY AREA
? Keep the area underneath and around your appliances free of combustible materials,
(lint, paper, rags, etc.), gasoline, chemicals and other flammable vapors and liquids.
? Keep all laundry aids (such as detergents, bleaches, etc.) out of the reach of children, preferably in a locked cabinet. Observe all warnings on container labels to avoid injury.
? Keep the floor around your appliances clean and dry to reduce the possibility of slipping.
? Never climb on or stand on the dryer top.
? Keep the area around the exhaust opening
and adjacent surrounding areas free from the accumulation of lint, dust and dirt.
? Do not obstruct the flow of ventilating air. Do not stack or place laundry or throw rugs against the front or back of the dryer.
WHEN USING YOUR DRYER
? The laundry process can reduce the flame retardancy of fabrics. To avoid such a result, carefully follow the garment manufacturers care instructions.
? Clean the lint filter before each load to prevent lint accumulati