GE Quiet-Aire™ Ductless Air Conditioning Split System Component AS0CD18DA0 user manual

24-hour timer (delay start / pre-set stop).
IF YOU NEED SERVICE

Customer Service

Customer Service

GE & You, A Service Partnership.

Warranty ... ... ... ... . . .

Service Telephone

If you do need service, you can relax knowing help is only a phone call away. A list of toll-free customer service numbers is included in the back section. Or, you can always call the GE Answer Center at

800.626.2000, 24 hours a day, 7 days a week.

For any service which requires entry into the refrigerant sealed system, Federal regulations require the work be performed by a technician having a Class II or Universal certification.

Safety Instructions

IMPORTANT SAFETY INFORMATION.

READ ALL INSTRUCTIONS BEFORE USING.

For your safety, the information in this manual must be followed to minimize the risk of fire, electric shock or personal injury.

SAFETY PRECAUTIONS

? Be certain the power source is disconnected before servicing the product.

For any service which requires entry into the refrigerant sealed system,

Federal regulations require the work be performed by a technician having a

Class II or Universal certification.

? We strongly recommend that any servicing be performed by a qualified individual.

? Since outdoor condensing unit has a sump heater on the compressor for heat pump models, the power should be turned on at least 5 hours before unit operation. Leave the power on unless you will not be using the system for an extended period of time.

Operating Instructions

? This system must be properly installed in accordance with the Installation Instructions before it is used.

Installation Instructions

Read and follow this Safety Information carefully.

SAVE THESE INSTRUCTIONS

Troubleshooting Tips

Customer Service

The remote control transmits the signals to the system.

Features of the Remote Control Door Open

Installation Instructions

Operating Instructions

Safety Instructions

About the remote control on the system.

Troubleshooting Tips

Flip-up door (opened)

OPERATION DISPLAY

Displays the operation conditions.

START/STOP BUTTON

Operation starts when this button is pressed and stops when the button is pressed again.

OPERATION MODE SELECTION BUTTON

Used to select the operation mode.

Customer Service

ON/OFF TIMER BUTTONS

Used to set the time of starting and stopping operation.

TIME SETTING BUTTONS

Used to adjust the time.

TIMER SET/CANCEL BUTTONS

Used to set