CASABLANCA FAN COMPANY 55028 Fan user manual

Preparation

We are proud of our work and appreciate the opportunity to supply you with the best ceiling fan available anywhere in the world.

Tools Needed

1.888.227.2178

What to Expect with Your Installation

1.888.227.2178

Read and Save These Instructions

If you are unfamiliar with wiring, use a qualified electrician.

This product conforms to UL Standard 507. from blade tip to nearest wall or obstruction

Must be able to secure the fan to building structure or fan-rated outlet box

Know your wiring

You may need a friend to help you.

Assess location

Ceiling angles greater than 34 will require an

Angled Mounting Kit.

See page 4 for details.

Check box to see fan weight from bottom edge of blade to the floor

Assess ceiling angle

Standard Downrod for ceilings 8-10 feet high

Shorter Downrod

Longer Downrod

for fans installed close to ceiling for ceilings 10 feet or higher

Select a downrod length

M6005-01 04/16/15 20122015 Casablanca Fan Company w.1 - To reduce the risk of fire, electrical shock, or personal injury, mount fan directly from building structure and/or an outlet box marked acceptable for fan support of 70 lbs (31.8 kg) and use the mounting screws provided with the outlet box. w.2 - To avoid possible electrical shock, before installing or servicing your fan, disconnect the power by turning off the circuit breakers to the outlet box and associated wall switch location. If you cannot lock the circuit breakers in the off position, securely fasten a prominent warning device, such as a tag, to the service panel. w.3 - To reduce the risk of fire, electrical shock, or motor damage, use only Casablanca Solid State Speed Controls. w.4 - To reduce the risk of personal injury, do not bend the blade brackets when installing the blade brackets, balancing the blades, or cleaning the fan. Do not insert foreign objects in between rotating fan blades. c.1 - All wiring must be in accordance with national and local electrical codes ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualified electrician. c.2 - Use only Casablanca replacement parts.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC

Rules. These limits are to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications.

Tools Needed

Wire Strippers

9/64 Drill Bit

(optional)

Power Drill

(optional)

If mounting to a support structure, you will also need these tools.

M6005-01 04/16/15 20122015 Casablanca Fan Company

Screwdrivers

1.888.227.2178

Mounting Options

If you have a flat ceiling:

1. You will need a longer downrod (sold separately).

2. If your ceiling angle is greater than 34, you will also need an Angled Mounting Kit (sold separately).

Outlet Box

(required)

Use the three steps below to determine if your ceiling angle is greater than 34

1.888.227.2178

If you have an angled ceiling:

Outlet Box

(required) against wall on dotted line

Guide Touches

BOTH Ceiling & Wall

You need ONLY

*most common toward ceiling

Guide Touches Wall but NOT Ceiling

Hang your fan by a standard downrod (included).

Use Standard Mounting or Low-Profile Mounting to hang the fan from a flat ceiling.

You need BOTH

Mounting Kit

M6005-01 04/16/15 20122015 Casablanca Fan Company

Use Angled Mounting to hang the fan from a vaulted or angled ceiling.