B&B ELECTRONICS ESR901 Home Theater Server user manual

Network data activity

Ready/normal

Bootup/reset/malfunction

Port not opened

Port opened

TX or TX/RX serial data activity

Port not opened

Port opened

RX serial data activity

ServersVlinx ESP Manager and it should auto-search for

Serial (if avail.) attached ESP901/902/904 or ESR901/902/904 devices on

Note that the device must reside on the same subnet or

Ports To Open in Firewall it wont be seen by the Vlinx ESP Manager software for first time discovery.

Use the Vlinx ESP Manager software to configure the

Heartbeat & configuration setting in TCP unit for network information, serial device configurations, timeouts, etc (double-click on your device in the list).

Vlinx update

Alternative method is to set the dipswitches in console

Configuration setting in UDP mode

Vlinx monitor mode and use Hyperterminal set at 9600 and 8-N-1. Use

4000/1/2/3 the arrow and key to configure (requires null modem/cross-over serial cable connected to Port 1). Be sure to set dipswitches back to run mode when done. (Not avail. on ESP904).

Default password =

International Headquarters: 707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA

Reboot as necessary.

ESR901/902/904

Run/console

Run/console

Run/console

Run/console

Run/console

Run/console

Run/console

Run/console

Run/console

ESP01/902 must be ALL UP or ALL DOWN.

Documentation Number ESP90x ESR90x-0508qsg

PN7071-rev001

European Headquarters: Westlink Commercial Park Oranmore Co. Galway Ireland