Instrucciones en Espaol
Registration Information and Registration Card
INDUCTION HOTPLATE SAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.
This is the Safety Alert Symbol.
This symbol alerts you to potential hazards that can kill or injure you and others.
All safety messages will follow the Safety Alert Symbol and either the words
DANGER, WARNING or CAUTION. These words mean:
Danger means that failure to heed this safety statement may result in severe personal injury or death.
Warning means that failure to heed this safety statement may result in extensive product damage, serious personal injury, or
Caution means that failure to heed this safety statement may result in minor or moderate personal injury, or property or equipment damage.
All safety messages will alert you what the potential hazard is, tell you how to reduce the chance of injury, and let you know what can happen if the instructions are not followed.
Before the appliance is used, it must be properly positioned and installed as described in this manual, so read the manual carefully. To reduce the risk of fire, electrical shock or injury when using the appliance, follow basic precaution, including the following:
It is recommended that a separate circuit, serving only your appliance be provided. Use receptacles that cannot be turned off by a switch or pull chain.
Never clean appliance parts with flammable fluids. These fumes can create a fire hazard or explosion. And do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. The fumes can create a fire hazard or explosion.
Before proceeding with cleaning and maintenance operations, make sure the power line of the unit is disconnected.
Unplug the appliance or disconnect power before cleaning or servicing. Failure to do so can result in electrical shock or death.
Do not attempt to repair or replace any part of your appliance unless it is specifically
recommended in this manual. All other servicing should be referred to a qualified technician.
This appliance shall not be used for space heating. The surface unit should not be operated without cookware. This information is based on safety considerations.
All openings in the wall behind the appliance and in the floor under the appliance shall be sealed.
Keep appliance area clear and free from combustible materials, gasoline, and other flammable
Do not obstruct the flow of ventilation air.
Disconnect the electrical supply to the appliance before servicing.
When removing appliance for cleaning and/or service:
Electrical Grounding Instructions - The appliance must be installed and in accordance with the
National Electrical Code ANSI/NFPA No. 70 (Latest Edition) and local electrical code requirements.
Replacement Parts Only authorized replacement parts may be used in performing service on the range. Replacement parts are available from factory authorized parts distributors. Contact the nearest Avanti service center in your area.
HELP US HELP YOU...
Read this guide carefully.
Write down the model and serial numbers.
It is intended to help you operate and maintain your new Induction Hotplate properly.
You'll find them on a plate located on the front bottom wall of the Induction Hotplate.
Keep it handy to answer your questions.
If you don't understand something or you need more assistance, please call:
Please write these numbers here:
Date of Purchase
Avanti Customer Service