Audiovox PAV-1 Cassette Player user manual

AM/FM/MPX RADIO / MONITOR WITH

CASSETTE PLAYER, CD CHANGER CONTROLS

AND WIRELESS REMOTE CONTROL

DIGITAL AUDIO

This product should ONLY be installed in accordance with this products wiring instructions so that the monitor display will be disabled if the parking brake is not applied. The monitor section of this product should ONLY be operated while the transmission of the vehicle is in Park (or Neutral for manual transmission vehicles) and the parking brake is applied.

Operating Instructions ...

Remote Control Operation ...

CD Changer Controls ...

CD Changer Error Codes ...

Specifications ...

Care and Maintenance ...

Warranty ...

TING INSTR

INSTRUCTIONS

1 ON-OFF POWER BUTTON (POWER) the VOL indication on the display panel. To increase the volume quickly, keep the button pressed. To decrease the volume level, press the - side of the control. Keep the button pressed to decrease the volume quickly. During Monitor operation, the display will automatically disappear 5 seconds after the last

VOLUME/LEVEL CONTROL (+ / - ) volume or audio level adjustment. This control is also used in

To increase the volume level, press the + side of the control. conjunction with the Select button to adjust the bass, treble,

The volume will increase and the level will be shown by the bars of balance and fader levels as described in , , , and .

-1Press this button to turn the unit on or off. The unit will also turn on automatically when a cassette is inserted if the ignition is turned

3 SELECT BUTTON (SEL)

This button is used to select the audio function (bass, treble,

balance, or fade) to be adjusted using the Level control .

Pressing the Select button once will set the unit for bass adjustment (BAS indication highlighted on display panel).

Pressing the button additional times will select treble adjustment

(TRE highlighted on display), balance (BAL) or fader (FAD).

The display will automatically return to the normal indication

5 seconds after the last adjustment is made or when another function is activated.

4 BASS CONTROL

To adjust the bass level, first select the Bass mode by pressing the Select button until the BAS indication is highlighted on the display panel. Within 5 seconds of choosing the Bass mode, to adjust the bass press the + or - side of the Level control response as desired. The bass level will be shown by the bars on the display panel from a minimum of LIIIIIIIIIIIIIH to a maximum of LIIIIIIIIIIIIIH (LIIIIIIIIIIIIIH represents flat response). The display will automatically return to the normal indication 5 seconds after the last adjustment or when another function is activated. response). The display will automatically return to the normal indication 5 seconds after the last adjustment or when another function is activated.

6 LEFT/RIGHT BALANCE CONTROL

To adjust the left-right speaker balance, first select the Balance until the BAL indication mode by pressing the Select button appears on the display panel. Within 5 seconds of choosing the

Balance mode, press the - side of the Level control the stereo balance to the left channel speakers or the + side of the control to adjust it to the right channel speakers. The balance position will be shown by the bars on the display panel from

LIIIIIIIIIIIIIIR (full left) to LIIIIIIIIIIIIIR (full right). When the volume level between the left and right speakers is equal,

LIIIIIIIIIIIIIR will be shown on the display panel. The display will automatically return to the normal indication seconds after the last adjustment or when another function is activated.

7 FRONT/REAR FADER CONTROL

To adjust the front-rear speaker balance, first select the Fader until the FAD indication mode by pressing the Select button appears on the display panel. Within 5 seconds of choosing the

Fader mode, press the + or - side of the Level control

TREBLE CONTROL adjust the front-rear speaker levels as desired. The fader

To adjust the treble level, first select the Treble mode by press- position will be shown by the bars on the display panel from ing the Select button until the TRE indication appears on the FIIIIIIIIIIIIIIR (full front) to FIIIIIIIIIIIIIR (full rear). When display panel. Within 5 seconds of choosing the Treble mode, the volume level between the front and rear speakers is equal, press the + or - side of the Level control to adjust the treble L IIIIII I IIIIII H will b