American Standard 2555.602 Indoor Furnishings user manual

And includes positive shut-off. Allows spout and showerhead in any desired installation location.

Adjustable Hot Limit Safety Stop:

(3-11/16")

Integral Plaster Guard and Mounting Plate:

Plaster guard designed to protect valve during installation and to serve as a mounting plate for thin wall installations.

THREADED INLETS (STOPS)

Built-in Diverter: Easy to use, integrated in valve body

Limits the amount of hot water allowed to mix with cold. Reduces the risk of accidental scalding.

25mm INLETS

SPOUT MTG.

SUGGESTED SPECIFICATION:

Bath/shower fitting shall be cast brass construction with all brass spout and showerhead. Shall also feature washerless ceramic disc valve cartridge which allows user to control water temperature. Fitting shall be equipped with a pressure balancing mechanism and hot limit safety stop. Fitting shall be American Standard Model # 2555.____.____.

PRESSURE BALANCE BATH/SHOWER

2008 AS America Inc.

TOWN SQUARE

PRESSURE BALANCE BATH/SHOWER FITTING

WITH BUILT-IN DIVERTER

CODES AND STANDARDS

FLOW RATE*

GALLONS PER MINUTE

These products meet or exceed the following codes and standards:

ANSI A117.1

ASME A112.18.1

INLET PRESSURE (PSI)

*Flow rates shown are for mixed hot and cold.

Finish Options

Polished Blackened

Chrome Bronze

Description

Pressure Balance Bath/Shower w/built-in diverter.

"Rain" showerhead. Brass tub spout for wall mount installation.

2555.652 Pressure Balance Bath/Shower w/built-in diverter.

"Rain" showerhead. Brass tub spout for deck mount installation..

Meets the American Disabilities Act Guidelines and ANSI A117.1 Requirements for the physically challenged.

2008 AS America Inc.