RELAY NO, NO:
CEU (RJ-45 Jack):
Normally Open relay contact, activated whenever communication is active.
Transistor-switched input / output to be connected to relay input / output on transmission equipment. Call In indicates call placed by door station, Call Out indicates master-initiated activity (polarity of input / output indicated by + and -).
Input / Output connections for audio transmission (line level, polarity indicated by
+ and -).
Composite input signal from CCTV camera, if used in place of AX-series audio video door station.
Composite output to external transmission equipment. Source dependent upon
CCTV / DOOR switch.
Determines whether AX-series audio video door station video (DOOR setting) or external CCTV video (CCTV setting) will be present on VIDEO OUT for connection to external transmission equipment.
RJ-45 connection from AXW-AVR to CEU, simulating a standard AX-series Audio/
Video door station.
COMPATIBLE DOOR STATIONS (AXW-AVT):
Surface mount, die cast zinc, vandal resistant, Audio-Video
Flush mount, stainless steel, vandal resistant, Audio-Video
Mullion mount, black plastic, Audio Only
Surface mount, brown plastic, Audio Only
Surface mount, brown plastic w/aluminum, Audio Only
Flush mount, 2 gang, stainless steel faceplate, Audio Only
Flush mount, 2-gang, stainless steel, vandal resistant, Audio Only
Flush mount, 2-gang, stainless steel, vandal resistant w/red mushroom call button, Audio Only
1. Follow standard AX programming procedures as described in the AX Installation & Operation manual (included on CD with the AX CEU).
2. When configuring door stations, be sure to set the station number corresponding to the AXW-AVT / AVR to Video in the AX setup utility.
Typical configuration selection
AXW-AVT / AXW-AVR with Meridian Technology Fiber (ST/SR-1W1A2C/1A2C-XS), 1 of 2
AX-DM or IE/IF-Series
Audio Door Station
Configuration Notes (1 of 2, continued):
4. When the SENSOR input is used, the door station